Producing Drinking water 1,500 liters per hour by Gasoline Engine Pump.
Gasoline engine operation and filter location also can be operated by hand pump.

Cycleclean 1500 generates drinking water from swimming pools,rivers, lakes and well water.
High-performance 0.1 micron filtration remove 0-157,cryptosporidium, and Legionella bacteria

Simple overview of Cycloclean 1500

Parts for filtering pre-filter, activated carbon filter, hollow fiber membrane.
Filtration 0.1 micron filtration remove 0-157, cryptosporidium, Legionella bacteria.
Raw water /
Water source
Live river and lake water inhabited by fish, piped water, well water
and swimming pool water.
Performance Target amount of water to be produced: Approx. 1,500 liter per hour
Note: *Data above are of initial value and are not guaranteed.
Power souse and
Gasoline engine or a Hand pump
Operation hours About 0.5 hour (Put fuel in and start engine again)
Full fuel Nonleaded regulator gasoline: 0.5 liter
Materials Stainless steel SUS304 (baking finished)
Condition Outdoor but do not expose it to rain for a long time.
Outside temperature Within 5 - 40 ℃
Pump lead-in Horizontal direction: within -1m depth , Vertical direction: within 5m long
Outline measure W 620 x D800 x H670 mm inclusive of the 70mm lever
Weight When dried: about 50kg, at max about 65kg with water
Standard accessories Hose for purified water (A-hose) x 1,
Feed water hose with a strainer (B-hose) x 1,
Hose band x 2, Filter Housing wrench x1
Note:*Frequency of replacement of filters depends on upon the quality of raw water. (Replacement of
filters is recommended when you notice water flow slowing down, bad smell and irregular noise.)
Return    Page Top

Design & Copyright © 2006 NIPPON BASIC Co.,Ltd. All Rights Reserved.